The Flute Valve will enable the refrigerant to “micro-atomize” or
expand at a greater rate than normal when it is forced into a
swirling motion immediately before being passed through a
metering results in greater cooling.
Enhanced oil migration
The turbulent refrigerant flow created by the Flute Valves serves
to circulate the oil in the refrigerant loop. Stagnant oil in the
refrigerant piping acts as an insulator and a flow restrictor.
Extend Compressor Life
The improved oil circulation enabled by the Flute Valves will move
more oil back into the compressor where it is intended to be.
Some customers have reported sharp drops in compressor failures after implementing Flute Valves.
Designed for Reliability
With no moving parts in the Flute Valve, there is nothing to break
or wear out.
Easy to Install
The Flute Valve is as easy to install as any filter or dryer.
Copper piping with
stainless steel internal fins
Plastic end caps for purity
Standard Size is 1 1/8” I.
D. piping (to mate with 1
1/8” O.D. Tubing)
Use bushing to reduce
piping down to the size
required. For larger
diameter units, contact us
for a custom order.